Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
From the brand
.
KITCHEN FITTERS PACK: The Trend CraftPro Kitchen Fitters Pack includes five straight cutters with a 1/2″ shank, 12.7mm Cutting Diameter, and 50mm Cutting Length. Perfect for use on chipboard, MDF, plywood, and certain hardwoods.
TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter’s lifespan for uninterrupted router performance.
PRECISION CUTTING: The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
SAFETY & COMPATIBILITY: Longer shanks accommodate both handheld and table routers. Features a Safety K-Mark for optimal shank positioning. EN Shank Markings for visible cutter safety data.
Customers say
Customers find these router bits to be of good quality and consider them good value for money. The sharpness receives mixed feedback, with some customers finding them very sharp while others report issues. Additionally, the blade quality receives negative feedback, with one customer mentioning chips in the blades.
[ad_2]
9 reviews for Trend CraftPro Kitchen Fitter Worktop Router Cutter Bit, 1/2 Inch Shank, 12.7mm Cut Diameter & 50mm Cut Length, Pack of 5, Tungsten Carbide Tipped, CR/KFP/5
Add a review
Router cutters.
Alot cheaper than buying local and exactly the same. Great value.Will buy again.
Exactly as described.
Kitchen fitting requires good quality router bits. These trend bits do the job well. They are super sharp and keep their edge well.
Value for money
Just the ticket and a good price.
Right tool for the job
I like the quality and prices of Trend tools.I used these cutters to join my kitchen work tops together with no problems.
12
Spot on as usual fab quality
They will only do 1 mason mitre
After doing 1 mason mitre, they lose there sharpness. I recommend 1 cutter per joint for the perfect cut. I tried to get 2 out of them and your just fighting the router, instead of a nice smooth cut. But at £10 per cutter it’s not a too bad a price.
Compact laminate
Give a very good finish on compact laminate work tops very sharp cutter blades
great
great set for the worktop fitter.i use these all the time . i fit worktops from laminate to solid oak , when doing laminate or solid joints do the first run in the jig about 3mm deep then run a jigsaw through the jig keeping away from the finished edge and getting rid of a lot of waste material .making it easy for the router and bit to do a good job .you should then do about 4/5 more passes with the cutter ,take your time as the final cut is the money cut . your cutter should last several worktops . test each time on a scrap to make sure no chipping . also make sure you have arouter up to the job as power is vital especially on solid . you want smooth,smooth, smooth.here is a tip , when you open a fresh pack and take one out tape up the remaining cutters with insulating tape to stop them from knocking against each other and you also know which are the new ones…
No brainer,these are worth every penny have used these for years with no complaints